Updating firmware for dell equallogic ps series storage arrays

It has created the 3 vmkernel ports and each ones is bound to a vmnic, each vmkernal port has one active nic and 2 "not used", when i look at hte 3rd host and look at the i SCSI initiator port bindings, i can see all 3 active paths, however, when i look at host 1 and 3, one path says "not used" and as mentioned above, these 3 host are identical, im just lost as to why the last path is "not used" and yet the host host shows all active which is what i expected to see.

I have stuck some screenshots in a word document attached Thank you again for your help.

Below you can see an extract from my Pu TTY log file, and the process that happens:- EQL01 update Updating from kit file "kit_V5.1.2-R197668_718896520.tgz" This command will update the firmware on the array's flash card memory using the update kit file that was copied to the array. Waiting for secondary control module synchronization...

If you choose to proceed, you will be shown the current firmware version and the version to which you will update. When the update procedure completes, the update procedure will automatically send e-mail to your PS Series support provider and to the e-mail address you have configured for your support contact: [email protected]********** E-mail notification requires connectivity from the array to the Internet through the SMTP server at address 10.11.5.40. Setting up for Email notification of update once new firmware has been loaded Update completed successfully. Waiting for secondary control module synchronization...

Firstly download the firmware from Equal Logic Support https://support.Lets update the firmware. Waiting for secondary control module synchronization...

- FTP to the Management interface of the Equal Logic Array, Upload the TGZ file. Waiting for secondary control module synchronization...

The SRA works this out by looking at the files that make up the VM and only reporting LUNs/volumes which are in use by VMs on ESX hosts.

Of course I'm assuming you have a storage array which is supported for use with SRM.

It may be that you don't, and you would prefer to use VMware's v Sphere Replication (VR) instead.

Update Star includes support for many languages such as English, German, French, Italian, Hungarian, Russian and many more.

You can choose your language settings from within the program.

Updating firmware for dell equallogic ps series storage arrays